Personal advice – directly from the Urquelle team 30-day money-back – 100% risk-free trial Installment payments from €67.43 per month – flexible and easy Handcrafted in Germany
Symbolic natural motif: A rusty tap supplies water to the full DIAMANT spring; to the right, clear water flows from the facility into the mountain lake.
The Urquelle Technology

From your tap to your own Urquelle.

Perfectly coordinated processes.

Inspired by nature

Three acts. Fifteen steps.

First, purify. Then, replenish with minerals. Finally, revitalize. Three harmonized processes – for your very own spring water.

Compact spiral membrane in a transparent cylinder: water flowing in on the left, clear filtered water on the right. 01–033 Levels
Step 01 · Clean

Deep filtration

The pre-filter, precision membrane, and activated carbon form the basis.

Discover the cleaning
Close-up view of many small volcanic minerals, Sango granules, and EM ceramic under clear water 04–063 Levels
Act 02 · Renaturation

Renaturation

Selected natural materials return minerals to the purified water.

Discover mineralization
Many small rock crystals, rose quartz and amethyst at a stream with a water vortex, copper pipe and UMH 07–159 steps
Act 03 · Revive

Full-spectrum energizing

Gemstones, swirling, and UMH come together in the final process.

Discover the refinement

Each step builds on the previous one.

1Act 1 · Deep Filtration · Stage 01–03

Filtration – everything that doesn't belong in the water.

Before water can become a spring again, it must be uncompromisingly pure. Three stages remove what has entered on its way through pipes and storage tanks.

ECF prefilter with sediment layers, activated carbon, turbid inlet and clarified outlet
01

Pre-filtration

5 micron · Carbon · 1 micron

What happens
In the first step, the water flowing through the Urquelle®Diamant undergoes highly precise pre-filtration, which in turn consists of a 1-micron unit (filter rating: 0.001 mm), activated carbon (filter rating: up to 0.00045 mm), and a 5-micron unit (filter rating: 0.005 mm), largely removing visible sediments such as lime, rust, dirt, heavy metals, and microparticles from the water. This effectively cleanses the water of both coarse and fine impurities. The path has been paved for highly pure and, above all, natural water.

Basic removal of harmful coarse matter, fine matter & dirt particles

RO cartridge with visible membrane layers and separate permeate and concentrate paths
02

Molecular Filtration

Reverse Osmosis · 800 GPD · 0.0001 µm

What happens
In the second step, the filtration process is completed with highly effective molecular filtration. The now significantly purer water passes through an extremely high-quality molecular filter (800-GPD membrane | filtration rating: 0.0001 µm), which precisely removes organic and inorganic contaminants. These include, for example, pharmaceutical residues, hormones, chemicals, plasticizers, microplastics, parasites, bacteria, and viruses. The water is then highly purified and virtually free of all contaminants and particles. The foundation for further refinement has been laid.

Thorough removal of all organic and inorganic contaminants

C2 activated carbon post-filter in a stream: clear water flows in on the left and out on the right; a magnifying glass shows the adsorption on the carbon surface
03

Activated carbon post-filter

Activated carbon from coconut shells

What happens
In the third step, the Urquelle®Diamant system uses a neutralizing activated carbon post-filter. As soon as the highly purified water passes through this refining filter, any remaining traces are removed. In addition, virtually all odors and flavors are neutralized. The water is thus optimally prepared for further filtration and subsequent refinement.

Precise removal of all harmful odor- and taste-causing substances

2Act 2 · Restoration · Level 04–06

Now the water is pure – but not yet completely.

During the purification process, not only did the pollutants disappear, but so did the natural minerals that make good spring water what it is. Pure water is a blank slate. The second act fills it again – just as nature would.

Sharp close-up of bright EM ceramic rods in a natural stream
04

EM-Clay Ceramic

Smaller clusters · lower surface tension

What happens
In the fourth step, the Urquelle® Diamond Water comes into contact with a special clay ceramic (EM). Thanks to a special microorganism structure fired into the clay, the water is further restored to its original state. All harmful frequencies present in the water are eliminated during this process, because the clay ceramic naturally breaks up all water clusters. This massively reduces surface tension and restructures the water on both a physical and subtle level. The water is then optimally prepared for mineralization and revitalization.

Deletion of all corrupted information and cluster restructuring

Many small porous volcanic mineral stones in water, in front of a natural volcanic landscape
05

Volcanic Mineral Rock

Alkaline-active rock of volcanic origin

What happens
In the fifth step, the prepared Urquelle® Diamond Water is remineralized with high-quality volcanic mineral rock. The alkaline-active minerals of volcanic origin restore the water's natural properties and create a resonance foundation for the subsequent revitalization. They support the development of a harmonious hexagonal structure and prepare the water for further remineralization. In this way, the power of mountains, valleys, and ancient springs is incorporated into the treatment process.

High-quality remineralization thanks to premium volcanic mineral rock.

Clear water flows through bright Sango coral gravel in a natural stone runnel
06

Sango Sea Coral

Over 70 minerals · pH 6.4–7.4

What happens
In the sixth step, the Sango sea coral enriches the water with a broad spectrum of over 70 natural minerals. It completes the remineralization process initiated earlier and supports a balanced pH level. The mild mineral composition is modeled on natural spring water and provides the resonance foundation for the subsequent vitalization stages. In this way, the water is restored not only to its mineral diversity but also to the energy of the ocean.

Final renaturation and pH optimization

3Act 3 · Revitalization · Level 07–15

Pure and mineralized – but not yet alive.

Mountain spring water matures on its journey through rock: it flows, swirls, and finds its order. This very vitality cannot be filtered – it must be returned to the water. This is the third act: revitalization.

The following stages are based on natural models and on what is traditionally attributed to crystals, vortexing, and structure. Two of them – germ protection and vortexing – also work purely physically.

Many small raw rock crystals by the stream; a clear contour of light marks the entire lowest layer of rock crystals in the transparent energy cartridge
07

Rock Crystal

Purity, clarity and freshness

What happens
In the seventh step, the water comes into contact with a wide variety of high-quality quartzes at the beginning of the revitalization process. A large quantity of rock crystal stands out here, through which the water becomes highly charged energetically and also receives the energy of purity, clarity, and freshness.

The initial energetic processing (purity, clarity, and freshness)

Many angular raw rose quartz crystals by the stream; a light contour highlights the pink second layer of the energy cartridge
08

Rose Quartz

Gentleness and Harmony

What happens
In the eighth step, the water comes into contact with rose quartz, which on the one hand transfers an energy of gentleness to the water, and on the other hand promotes the restoration of an original spring water signature. The regeneration of important frequency fields is initiated by this contact.

Improvement of the energetic signature (energy of gentleness)

Many small raw amethyst crystals by the stream; a continuous line of light marks the purple amethyst layer beneath the black shungite
09

Amethyst

Stabilizes the signature

What happens
The gemstone revitalization is then rounded off with high-quality amethysts, giving the water an energetic signature and quality that largely resembles the original spring water quality. Even now, the water already exhibits a greatly enhanced energy level and possesses special properties.

Final restoration of the authentic spring water signature

Many small raw shungite stones by the stream; the narrow top black layer of the energy cartridge is marked with a light contour
10

Premium Shungite

Conclusion of the gemstone series

What happens
In the tenth step, the gemstone revitalization is complemented by precious shungite. The precious shungite, embedded at the very top of the last revitalization cartridge, transmits a powerful energy of purity and freshness into the now energetically highly prepared Urquelle® diamond water. Furthermore, in this step, the last disharmonious information and particles are neutralized. Hardly any gemstone has such a purifying effect on water in this context as precious shungite does.

Powerful energetic cleansing and final neutralization

Germ filter cartridge with clear inlet on the left and outlet on the right; an enlarged view of the membrane shows trapped germsDetail of the filter membrane
11

Germ filter

Natural germ barrier · LOG 6 physical

What happens
In the eleventh step, the now highly purified water passes through a natural germ barrier that effectively filters bacteria, viruses, parasites, and other germs almost completely out of the water (LOG 6). This process takes place naturally, i.e., completely without irradiation. Thus, the system is not only protected against contamination, but also achieves an even higher degree of purity. The germ filter also removes molecular particles and other organic impurities.

Thorough removal of all organic and inorganic contaminants

Inspired by nature

Full-spectrum Energization.

After the gemstone series and germ barrier, complete agitation, Agnihotra ash, UMH GOLD and natural diamond complete the processing.

Fully visible copper implosion tube next to a schematic vortex
12

Copper Vortex Implosion

Copper implosion tube physical

What happens
In the twelfth step, the water, which by now has been energetically spectrally and substantially restored, undergoes a very special kind of treatment, as it is subjected to genuine implosive vortexing, that is, the water is swirled into an original implosion tube (vortex – double helix). Just like in nature, a significant restructuring takes place here. The water is treated according to sacred geometry and, due to the implosion, is energetically energized to a near full spectrum. Furthermore, the entire implosion tube is made of high-quality copper, which also transmits a strong frequency to the water. Its frequency profile resembles fine gold and complements the special refinement of the water.

True implosion vortex according to Viktor Schauberger (Revitalization)

Dark gray Agnihotra ash in a glass vessel and as a fine pile on natural stone, with a small fire in the background
13

Agnihotra Ash

Glass vial in the energy cartridge

What happens
The thirteenth step builds directly on the previous energetic preparation, because inside an energy cartridge is embedded a glass vial containing sacred Agnihotra ash (similar to the Grander principle). The powerful force field of the sacred ash acts permanently on the water during the revitalization process, regenerates the existing frequency spectrum, makes the water significantly softer, and harmonizes the crystalline structure of the Urquelle® Diamond Water. At this point, the water is therefore optimally prepared for full-spectrum energization. The energy level is greatly increased, the energetic signature restored, and the frequency spectrum largely regenerated.

Regenerative energy transfer through the holy ash force field

Golden UMH, complete and large, on a natural stone above clear water with gentle waves
14

24 Karat Gold

Force field technology UMH GOLD

What happens
In the penultimate step, the water is swirled into the UMH GOLD force field technology. Its internal arrangement follows the golden ratio and combines swirling chambers, a pyramid-cut rock crystal, symbols, and water-filled borosilicate glass vials. The module is finished with 24-karat gold. The previous stages of vitalization are brought together here: The energetic signature and the harmonious hexagonal structure are intended to correspond to the quality of untouched spring water. The water is prepared for the final diamond polishing.

Final full-spectrum energizing by a powerful golden force field

Elegant faucet with a clear stream of water; the magnification shows a natural, uncut rough diamond without a jewelry setting in front of the aerator screen
15

Diamond

Natural diamond in the faucet aerator

What happens
In the fifteenth step, the water undergoes a final, important refinement, as it comes into contact with a genuine natural diamond. The natural diamond, embedded within the faucet aerator, not only transmits the energy of indestructibility, strength, resilience, invincibility, and beauty to the Urquelle® Diamond Water, but this refinement also restores important and above all hard-to-reach frequency peaks. This step therefore brings the Urquelle water quality to perfection. The water has become completely original. After this final step, the perfected Urquelle water can be drunk and, above all, enjoyed.

Restoration of key frequency peaks (energetic completion)

Complete DIAMANT Urquelle with three transparent cartridges, energy module and golden UMH on a rock by a mountain lake Urquelle DIAMOND · 15 Levels
The result

All 15 levels combine the Urquelle DIAMANT.

Your own pristine spring water – straight from the tap.

At the end of the 15 stages is water that combines the purity, mineralization, and vitality of a natural mountain spring – fresh, soft, and balanced in taste.

  1. Cleaned
  2. Mineralized
  3. Lively
Crystal Photography

This is what living water looks like.

Water is never the same – depending on its origin, treatment, and structure, it presents a completely different picture. Crystal photography makes this visible: the same water sometimes forms chaotic, other times finely ordered structures.

Crystal photography of typical tap water
Typical tap waterChaotic and disorganized – without any discernible structure.
Crystal photography of water, processed with the Urquelle DIAMANT
Refurbished with DIAMANT original partsFinely ordered and vibrant, with a hexagonal structure.
Crystal photography of mountain spring water from the Oberberg
Mountain spring water (Oberberg)This is what water looks like in its original form. Pure, with a clear structure.

Urquelle restores water to the state one knows from a natural mountain spring – clear, balanced, and vibrant.

Here you can find our studies and documents.

Evidence and Measurements

Still Questions?

We are here for you personally. Over the phone or in a free consultation, we will help you find the system that suits your home.

Marielen from Urquelle Customer Service with headset at the mountain lake
MarielenUrquelle Customer Service