Personal advice – directly from the Urquelle team 30-day money-back – 100% risk-free trial Installment payments from €67.43 per month – flexible and easy Handcrafted in Germany
SKU: UQ-0066

Filter Set - 3-Pack, Older Version (Outdoor Station and Travel) for 12 Months

Regular price 150,25 €
Tax included Shipping calculated at checkout.

Estimated delivery: 3–5 business days
Description

Scope of delivery for the annual filter change

  • 1x pre-filter
  • 2x activated carbon filters (replace every 6 months)
  • 1x UF membrane


Pre-filter (sediment filter):

1-5 microns: filters out coarse particles such as rust, dirt, etc.
The sediment filter can be washed out by hand several times and can therefore be manually cleaned of coarse particles. 

Our high-quality sediment filter reliably removes coarse impurities from the incoming water. Coarse particles, such as rust, dirt, and other organic compounds, are reliably filtered out. 
 

Ultrafiltration membrane (germ barrier):
Filters out all germs, parasites and bacteria (Legionella, E. coli, etc.)
Filter performance: 0.01 - 0.1 microns

The ultrafiltration membrane filters the water in depth and not only frees it from fine organic impurities, but also acts as a precise germ barrier, filtering germs, parasites, bacteria and other harmful pathogens out of the water. 


Carbonit Premium Block (activated carbon):

Filters: PFAS, microplastics, heavy metals, drug residues, pesticides, chemicals, organic substances, asbestos fibers, bacteria, chlorine and chlorine degradation products, other suspended solids.

Thanks to the special manufacturing process and the materials used, Carbonit's multi-certified activated carbon block filters outperform those of other manufacturers. Tests on adsorption performance have shown that the removal of organic compounds (chloroform in the test) is up to 400% higher, and for chlorine reduction, it is up to 700% higher compared to the competition.


Basic maintenance and disinfection after use (removal of the filter units):


1. Pump as much water as possible out of the system.

2. Next, remove the three filter units.

3. Wash the filter units with CDL.

4. Next, let the cartridges dry and reassemble the empty housing.

5. Now, pump the CDL solution with the pump and let it flow through the entire system.

6. Once the three filter units have dried, wrap the filters individually in clean towels, then store them in a cool, dry place (for example, in the basement).

7. Recommissioning the outdoor systems: Spray the filter units together with the empty cartridges with CDL for disinfection (recommended by us). Immediately afterwards, fully install the filters and wait approx. 60 minutes (for the disinfectant to take effect). After the exposure time, pump water through the system for 5 minutes (to clean the system). The outdoor system can then be put back into operation.

Our CDL spray recommendation: Ancevia CDL SPRAY 500ml

Important: After frequent use of the systems and over a long period of use, we recommend always disinfecting the filter units of the systems with CDL for deep cleaning and the removal of all possible contamination. The filter units themselves, especially the multi-certified Carbonit activated carbon block, do provide proven protection against possible contamination and meet very high quality and safety standards in this regard, but we still always recommend disinfection.


Cleaning the sediment filter:

The sediment filter (pre-filter for filtering out coarse incoming particles) can be washed out manually. To do this, remove this filter unit with the included wrench and wash it with a sponge or brush under running water (cool to lukewarm). Coarse particles can be removed this way. A possible clogging of the filter can be prevented with appropriate manual care of the sediment filter.